Owner`s manual

65
5. Connect the composite ports of each TX104 to the respective
composite port on the TX60 via modem or cable (see Section
3.5 ). Once the units recognize one another, you may configure
the required Serial Port Destinations for each TX104 (as shown
in the table on the previous page) remotely from the TX60.
( 
Since there are no adjustments and no moving parts in a Telplex,
preventative maintenance is unnecessary.
( #
If you find it necessary to return the Telplex to the factory for warranty
work or factory-set changes, follow the procedure listed in Section 7.2
for repacking. Before you ship your unit, please call BayTech to get a
Return Authorization number. BayTech cannot accept warranty or
no-charge returns without this number. Ship your unit to the address
listed in Section 8 , - Technical Support.
( #
If you need to repack your unit for shipping, please choose a heavy
cardboard box for packing. Surround your unit with sufficient
insulation (a minimum of 2-inches) to withstand the rigors of transport.
Be sure to seal the box securely with strapping or packing tape.
Masking tape or cellophane tape is not recommended.
Please put the Return Authorization number on the outside of the
cardboard box. BayTech cannot accept no-charge returns without
this number.