Owner`s manual
59
By responding to the
Enter Request:
message at the end of the main
configuration menu (see
Section 5.1.1
) with "7" for a multi-drop unit or
"5" for a standard unit (Composite Port Configuration), you may
review the current status of the composite port and make any
necessary changes. Programmable features for the composite port
include baud rate and Line Type.
NOTE: This choice will not appear in the main menu when
performing remote unit configuration.
The Telplex will respond with:
+------+------+------+------+------+--------+
| Port | Baud | Word | Stop |Parity| Line |
| | Rate | Size | Bits | | Type |
+------+------+------+------+------+--------+
| 5 | 9600 | 8 | 1 | None | Direct |
+------+------+------+------+------+--------+
Exit/Save......1
Set Baud Rate..2
Line Type......3
Enter Request:
You may now reconfigure the baud rate or the Line Type for the
composite port by entering the appropriate number. For example, if
you enter "2" in response to the prompt, the Telplex will respond with:
1 For 50
2 For 75
3 For 110
4 For 135
5 For 150
6 For 300
7 For 600
8 For 1200
9 For 2400
A For 4800
B For 9600
C For 19200
D For 38400
E For 57600
F For 115200
Enter Request: