Owner`s manual

58
The Telplex will respond with an updated status menu and prompt to
enter another port or "X" to exit. Type the number of any additional
port you wish to reconfigure or "X" to exit.
( #
NOTE: This section does not apply to standard units.
By responding to the Enter Request: message at the end of the main
configuration menu (see Section 5.1 ) with "6" (Set This Unit Number),
you may configure the Unit Number for the local Telplex.
IMPORTANT: When connecting multiple Telplex units together, all
units must have a unique Unit Number to insure proper operation.
The Telplex will respond with:
Current Unit Number is: 1
Press C to change or RETURN for no change:
If you wish to change the Unit Number of the local Telplex, type "C".
Enter the desired Unit Number. For example, if you wish the local
Telplex to have a Unit Number of 2, type "2" in response to the
prompt. The Telplex will respond with:
Current Unit Number is: 2
Press C to change or RETURN for no change:
If the Unit Number displayed is satisfactory, type <ENTER>. The
Telplex will return to the main configuration menu (see Section 5.1 ).