Owner`s manual

53
If you wish to enable Local Access for Port 2, type "Y" in response to
the prompt. The Telplex will respond with:
+------+------+------+------------+
| Port | Block|Local | Status |
| | Size |Access| Messages |
+------+------+------+------------+
| 2 | 255 | YES | OFF |
+------+------+------+------------+
Set Block Size.......1
Set Local Access.....2
Set Status Messages..3
Enter Request or X to Exit:
If you now wish to change the current setting of Status Messages for
Port 2, type "3" in response to the prompt. Please see Section 4.1.2.4
for an operational description of Status Messages. The Telplex will
respond with:
Status Messages:
1 For On
2 For Off
Enter Request:
Type the number corresponding to your desired setting for Status
Messages on Port 2. For example, if you wish to enable the Status
Messages for Port 2, type "1" in response to the prompt. The Telplex
will respond with:
+------+------+------+------------+
| Port | Block|Local | Status |
| | Size |Access| Messages |
+------+------+------+------------+
| 2 | 255 | YES | ON |
+------+------+------+------------+
Set Block Size.......1
Set Local Access.....2
Set Status Messages..3
Enter Request or X to Exit: