Owner`s manual

48
Type the desired port number followed by <ENTER>. The Telplex will
proceed to a status menu for the port you select and a list of options
to change. For example, if you type "3" followed by <ENTER> for
Port 3, the Telplex will respond with:
+------+------+------+------+------+------+------+-------+
| Port | Baud | Word | Stop |Parity| XON / XOFF | Pass |
| | Rate | Size | Bits | | Xmit | Recv |RTS-DSR|
+------+------+------+------+------+------+------+-------+
| 3 | 9600 | 8 | 1 | None | OFF | OFF | NO |
+------+------+------+------+------+------+------+-------+
Exit/Save......1 Set Parity................5
Set Baud Rate..2 Set XON/XOFF Xmit.........6
Set Word Size..3 Set XON/XOFF Recv.........7
Set Stop Bits..4 Set RTS/DSR Pass Through..8
Enter Request:
You may now reconfigure Port 3 by selecting the appropriate option
(1-8) from the menu. For example, to change the baud rate to 2400
baud, type "2" (Set Baud Rate). The Telplex will respond with:
1 for 50
2 for 75
3 for 110
4 for 135
5 for 150
6 for 300
7 for 600
8 for 1200
9 for 2400
A for 4800
B for 9600
C for 19200
Enter Request:
Type "9" for 2400 baud rate and the Telplex will respond with the
reconfigured status of the port and options menu as follows:
+------+------+------+------+------+------+------+-------+
| Port | Baud | Word | Stop |Parity| XON / XOFF | Pass |
| | Rate | Size | Bits | | Xmit | Recv |RTS-DSR|
+------+------+------+------+------+------+------+-------+
| 3 | 2400 | 8 | 1 | None | OFF | OFF | NO |
+------+------+------+------+------+------+------+-------+
Exit/Save......1 Set Parity................5
Set Baud Rate..2 Set XON/XOFF Xmit.........6
Set Word Size..3 Set XON/XOFF Recv.........7
Set Stop Bits..4 Set RTS/DSR Pass Through..8
Enter Request: