Owner`s manual





NOTE: This section does not apply to standard Telplex units.

Serial Port Destination is the remote Telplex terminal port a local

terminal port will connect to once a communication link is established.

The Serial Port Destination consists of the remote Telplex's Unit

Number, Module Number and Port Number. The Unit Number may

range from 1 to 32, the Module Number may range from 1 to 16 and

the Port Number may range from 1 to 8.

Factory default is Unit 1, Module 1, Port X, where X is the local

unit port number (1 to 8).





NOTE: This section applies to multi-drop units only.

Unit Number is used to identify multiple Telplex units and to direct

terminal port data. Unit Number informs a local Telplex that data

coming in from a remote unit is to be routed to a local port. If a

remote terminal port is to communicate with a local terminal port, the

remote terminal port would have the local Unit Number as part of its

Serial Port Destination. The Telplex Unit Number may range from 1

to 32. Factory default is Unit 1.