Owner`s manual

10
Please review the README.RDM file to obtain instructions for
TERM.EXE and SMODE.EXE. To view the README.RDM file on
your screen, first insert the diskette into your PC's disk drive and then
enter the command TYPE README.RDM from your disk drive
prompt. To print this file, enter the command
COPY README.RDM LPT1: from your disk drive prompt.
 
The TX104 and TX108 require 115 VAC, 50/60 Hz power and come
with a three-prong power cord. Do not attempt to operate the unit with
a two-prong socket or adapter. 230 VAC, 50/60 Hz is optional.
The TX102 requires external DC power. Plug the DC jack of the
external power supply into the 9VDC receptacle on the back of the
unit. Plug the AC connector into an AC outlet.
All Telplex models power up when you press the power switch to
"ON". A green LED on the front panel will illuminate when power is
applied.
CAUTION: Do not attempt to make any internal changes. Any
upgrades to the main board EPROM must be performed by an
authorized service technician or by BayTech. Please contact
BayTech at 1-800-523-2702 for more information.