Owner`s manual
9
This section discusses basic installation instructions pertaining to
unpacking your Telplex, obtaining the software from the supplied
diskette, power considerations, factory default parameters and
composite/terminal port cabling. Operation is described in
Section 4
,
Section 5
discusses configuration and
Section 6
provides specific
configuration examples.
After opening the box, check the packing list that comes with your
Telplex to ensure that you have received all components. At a
minimum you should have received the unit, this manual and any
applicable addendums, and a software utility diskette. The TX102 will
be provided with an external power supply. Check the unit to make
certain it did not incur damage during shipping. If items are missing or
damaged, contact BayTech technical support at 800-523-2702.
BayTech provides utility software for DOS compatible PCs to assist
you in configuring the Telplex.
IMPORTANT: Copy the BayTech original diskette onto a blank
diskette and store the original in a safe place.
The diskette contains the following programs: REMCONFG.COD,
SMODE.EXE, TERM.EXE and README.RDM. The Telplex does not
utilize the REMCONFG.COD file. TERM.EXE is a terminal emulation
program used to configure the various features of the unit.
SMODE.EXE is a program used to configure COM ports of DOS
compatible machines to operate at speeds faster than 9600 bps (up to
115,200 bps).