Owner`s manual

7
FACTORY POWER-UP DEFAULT CONFIGURATIONS:
Terminal Ports:
Baud rate: 9600.
Word size: 8 bits.
Parity: None.
Stop bits: 1.
XON/XOFF (TX): Off.
XON/OFF (RX): Off.
RTS/DSR Pass Through: Disabled.
Block Size: 32 characters.
Local Access: Enabled on Port 1 only.
Status Messages: Enabled on Port 1 only.
Serial Port Destination (multi-drop units only):
Port 1: Unit 1, Module 1, Port 1
Port 2: Unit 1, Module 1, Port 2
Port 3: Unit 1, Module 1, Port 3
Port 4: Unit 1, Module 1, Port 4
Port 5: Unit 1, Module 1, Port 5
Port 6: Unit 1, Module 1, Port 6
Port 7: Unit 1, Module 1, Port 7
Port 8: Unit 1, Module 1, Port 8
Unit Number (multi-drop units only): 1
Composite Port:
Baud Rate: 9600.
Word Size: 8 bits.
Stop bits: 1.
Line Type: Direct.
* String 1: <NULL>; Sent manually.
* String 2: <NULL>; Sent manually.
* - Applicable only if Line Type is programmed to be
Modem.