Troubleshooting guide

about 30 minutes there will be ~3 points in the Record Temperatures log file, and you can hit the
Update button to plot the current temperature.
During the first execution of initflam.pl, you will be asked at multiple points whether you wish to
continue. In general, if the daemon windows say "listening on port", startup has been successful, and you
should answer "y" (for yes). If you are re-running initflam.pl after rebooting MCE4 after a detector
controller crash (cf. § VII. Troubleshooting), but have left the other daemons running (which is OK), the
script will complain that the Motor and MCE4 daemons are stalled; however, these daemons are
probably functioning properly and you can type "y" to continue on.
NOTE: The MacMinis have four desktops (called spaces). If you move the mouse to the top right corner
of the right-hand monitor or the bottom left corner of the left-hand monitor, you will get a bird's eye view
of all of the four spaces and can pick one, or drag a window from one space to another. This a convenient
feature, which some might find annoying, and can be changed. One may also switch to another space by
clicking on the “spaces” icon in the dock at the bottom of the monitor screen.
NOTE: The daemon and temperature logging windows now come up automatically in the far upper left
monitor, which is usually reserved for displaying the telescope information (VDU). We recommend that
you move these daemon windows down to the upper left region of the lower left large monitor.
FLAMINGOS@4-m, Ver. 2.39, 2013 April 23 Page 10 of 47