Owner`s manual

3
You may program the following features to meet the requirements of
your application: the Port Designation for each port (computer or
printer), the individual Serial Port Configuration (baud rate, word size,
stop bits, parity, and XON/XOFF handshaking), the Port Logical
Names, the Input Inactivity Timeout, the Port Select Code, the Port
Select Mode, the Form Feed Mode, and the I.D. Page Message.
Programming of these features is easily accomplished via the menu-
driven configuration mode and all changes are saved permanently in
non-volatile memory. BayTech provides terminal emulation software
for this purpose.
The number of ports on the Model 24 can range from four to twenty-
four in multiples of four. The actual number of ports is determined by
the number of I/O modules installed. Each I/O module has four ports.
The Model 24 may have a maximum of six modules installed.