Owner`s manual

62
You may now enter another port number, or exit by striking <ENTER>.
The Model 24 will save the enabling or disabling of the I.D. Page
Message permanently in non-volatile memory and return to the main
configuration menu (see Section 7.1).
$ 
OPTION ACCESSIBILITY: Through Port 1 only.
By responding to the Enter Request: message at the end of the main
configuration menu (Section 7.1) with capital B (Select Print Schedule
for I.D. Page), you may schedule the I.D. Page Message to print before
or after a print job. This scheduling is done at the printer port. The
Model 24 will respond with:
••••••••••••••••••••••••••••••••••••
•
Port
•
Printer
•
I.D.Page
•
• •
Logical Name
•
Schedule
•
••••••••••••••••••••••••••••••••••••
•
2
•
Device B
•
Before
•
•
4
•
Device D
•
Before
•
••••••••••••••••••••••••••••••••••••
Enter Printer Port Number (ENTER = Exit) :
Enter the number of the printer port for which you wish to change the
I.D. Page Message print schedule and then strike <ENTER>. For
example, if you entered "2" and <ENTER>, the Model 24 will respond
with:
I.D. Page is to be Print ( Before ) the Print Job
Enter A for After, B for Before, ENTER for no change :
Enter "A" if you wish the I.D. Page Message to print after the print job,
or "B" if you wish the I.D. Page Message to print before the print job.
You can also strike <ENTER> for no change. For example, if you
entered "A", the Model 24 will respond with:
I.D. Page is to be Print ( After ) the Print Job
Enter A for After, B for Before, ENTER for no change :