Owner`s manual

52
$" 
OPTION ACCESSIBILITY: Through Port 1 with full menus, or through
any serial computer port with abbreviated menus.
By responding to the Enter Request: message at the end of the main
configuration mode (Section 7.1) with "5" (Set Port Select Mode), you
may change the method of selecting ports. The Model 24 will respond
with:
•
Port
•
Computer
T
imeout Port
• •
Logical Name
•
in Sec
•
Sel Mode
•
•
1
•
Device A
•
20
•
Anytime
•
•
3
•
Device C
•
20
•
Anytime
•
Enter Computer Port Number (ENTER = Exit) :
Enter the number of the port on which the Port Select Mode is to be
changed and then strike <ENTER>. For example, if you entered "1"
and <ENTER> for Port 1, the Model 24 will respond with:
Port Select Mode is : ( Anytime ) while printing
Enter A for Anytime, B for Beginning, ENTER for no change :
Enter the Port Select Mode that you wish. For example, if you entered
"B" for Beginning, the Model 24 will respond with:
Port Select Mode is : at the ( Beginning ) of printing only
Enter A for Anytime, B for Beginning, ENTER for no change :
If no other change is required, strike <ENTER> for no change and the
Model 24 will respond with:
••••••••••••••••••••••••••••••••••••••••••••
•
Port
•
Computer
•
Timeout
•
Port
•
• •
Logical Name
•
in Sec
•
Sel Mode
•
••••••••••••••••••••••••••••••••••••••••••••
•
1
•
Device A
•
20
•
Beginng
•
•
3
•
Device C
•
20
•
Anytime
•
••••••••••••••••••••••••••••••••••••••••••••
Enter Computer Port Number (ENTER = Exit) :