Owner`s manual

50
Enter the number of the port that you wish to designate a computer port
or a printer port and then strike <ENTER>. For example, if you entered
"4" and <ENTER> for Port 4, the Model 24 will respond with:
Port is designated as a ( Computer) Port
Enter P for Printer, C for Computer, ENTER for no change :
You may now designate the port by entering "P" for printer port or "C"
for computer port. <ENTER> may be sent for no change. For
example, if you entered "P", the Model 24 will respond with:
Port is designated as a ( Printer ) Port
Enter P for Printer, C for Computer, ENTER for no change :
When you strike <ENTER> for no change, the Model 24 will respond
with a reconfigured status menu, similar to:
•••••••••••••••••••••••••••••••••••••••••••••••••••••••
•
Port
•
Logical
•
Port
•
Port
•
Printer
•
• •
Name
•
Type
•
Designatn
•
Assignt
•
•••••••••••••••••••••••••••••••••••••••••••••••••••••••
•
1
•
Device A
•
Serial
•
Computer
•
0
•
•
2
•
Device B
•
Serial
•
Printer
•
2
•
•
3
•
Device C
•
Serial
•
Computer
•
0
•
•
4
•
Device D
•
Parall
•
Printer
•
4
•
•••••••••••••••••••••••••••••••••••••••••••••••••••••••
Enter Port Number (ENTER = Exit) :
You may now designate another port or exit by striking <ENTER>.
NOTE: When the port designation is changed for any port, the printer
assignment on all computer ports automatically resets to 0 (zero),
putting the computers in the contention mode.
The Model 24 will save the new port designations permanently in non-
volatile memory and return to the main configuration menu (see
Section 7.1).