Owner`s manual

45
$ 
OPTION ACCESSIBILITY: Through Port 1 with full menus, or through
any serial computer port with abbreviated menus.
The Model 24 will respond to the receiving of Control-T and capital C
with an identification block and a menu of the configuration options
available, similar to the following:
(C)Copyright Bay Technical Associates 1989
Model 24 Data Exchange System
Version 1 Revision 1.05
Total Memory : 0512K Bytes
Status......................................1
Program Port Logical Name...................2
Set Port Designation........................3
Program Port Select Code....................4
Set Port Select Mode........................5
Set Serial Port Configuration...............6
Set Input Inactivity Timeout................7
Enable/Disable Form Feed Mode...............8
Program I.D. Page Message...................9
Enable/Disable I.D. Page Message............A
Select Print Schedule for I.D. Page.........B
Exit Configuration..........................X
Enter Request :
NOTE: Menu selection is case sensitive. It is recommended that your
keyboard be in the CAPS LOCK position.
In the configuration mode an asterisk (*) is added to the port
number of previously recognized I/O Modules when it is no longer
detected on power up..