Owner`s manual

28
" &
A print job starts when the Model 24 receives three or more characters
from a computer. The characters must be sent in a time period shorter
than the designated timeout.
In Port Select Mode A, a print job is ended when one of the following
occurs:
1. No characters are received by the Model 24 from the
computer for the specified input inactivity timeout period.
2. The computer sends the manual disconnect consisting of
the Port Select Code followed by a terminating character:
Enter/Return or Line Feed character.
3. The computer sends a clear buffer command (see
Section 6.2.6 ).
4. The computer sends the Port Select Code followed by a
port number and a terminating character. If the port
number is the same number as that of the current print
job, this will indicate the end of the current print job, and
the next print job will be routed to the same printer. If the
port number is a different number from that of the current
print job, this will indicate the end of the current print job,
and the next print job will be routed to the newly selected
printer.