Owner`s manual

"%



You can print a programmable message and the logical name of the

source computer on a separate sheet of paper before or after printing

any other data. You can enable or disable the I.D. page message and

whether you want it to print before or after the print job.

Factory default is: This print job is for:, with the I.D. message

disabled.

"





The Model 24 Data Exchange System allows peripheral (printer,

plotter) sharing, between multiple computers and a single peripheral or

multiple peripherals. In multiple peripheral applications, users may

contend for the next available peripheral on a first-in-first-out-basis or

select a specific peripheral. Print data is stored in the unit's buffer and

sent to the peripheral as it can receive the information.

From the factory, the Model 24 is preset to allow multiple computers to

share one peripheral. The default printer port is Port 2. If your

application requires sharing multiple peripherals or if you will be sharing

a single peripheral with a parallel interface, you must access

configuration mode and change the Port Designation for the

appropriate port(s).