Owner`s manual

""

#

The input inactivity timeout allows the Model 24 to disconnect the

computer if no characters are received from the computer for the

specified timeout period. The input inactivity timeout is effective only

for computer-to-peripheral communication. For computer-to-computer

communication, the timeout is ineffective and disconnect occurs only

manually.

Some application packages may have rather lengthy processing delay

times between successive parts of the same file when printing. These

delay times may exceed the factory default input inactivity timeout

value of 20 seconds. Therefore, it may be necessary to increase the

input inactivity timeout on the Model 24 to a higher value. Typical

applications which may require a higher input inactivity value would be

ones which involve desk-top publishing, heavy graphics, and/or large

text files with imbedded soft fonts.

Factory default is 20 seconds.

"$



The Model 24 has four form feed modes allowing you to determine

when form feed occurs at the printers you are selecting. A form feed

may be sent at the beginning of printing, at the end of printing, at the

beginning and end of printing, or disabled (no form feed).

Factory default is no form feed.