Owner`s manual

11
To run INSTALL, use the following procedure:
1. Insert the software utility diskette into drive A (or drive B) and
from the prompt type INSTALL followed by <ENTER>.
2. A menu titled "Drive & Directory Definitions" will appear on your
screen. This menu will display the Source Drive , Destination
Drive , and Destination Directory . The Source Drive is the floppy
drive where the diskette is inserted. The Destination Drive is the
drive where the expanded files will be copied to (default is drive
C). The Destination Directory is the directory where the files will
be copied to (default is BAYTECH). If the default parameters do
not match your application, you may use the <TAB> key or a
mouse to change fields and type in the desired parameters.
Once you have entered the appropriate values, select "OK".
3. A menu will appear on your screen titled "Series Definition".
This menu will contain choices for the type of BayTech product
you have purchased. Highlight "Model 24 Series" with the arrow
keys or mouse followed by "OK".
4. A menu titled "Printer Selection Programs" will appear on your
screen. You are given three selections: RAMEXEC, RAMTSR,
and WNDEXEC. Choose RAMEXEC if your PC runs non-
Windows programs that do not operate in graphics mode.
Choose RAMTSR if your PC runs non-Windows programs which
operate in graphics mode. Choose WNDEXEC if your PC runs
under WINDOWS. Select the desired program by highlighting it
with the mouse or <TAB> key and depress the <SPACE BAR>
followed by "OK".
5. When INSTALL is finished, you may review the instructions for
the relevant files by referring to the README file copied to the
Destination Directory. To view the README file on your screen,
enter the command TYPE README from your subdirectory
prompt. To print this file, enter the command COPY README
LPT1: from your subdirectory prompt.