Owner`s manual

LaserShare is an intelligent printer controller that allows up to four or
eight computers to send data to a single HP LaserJet laser printer.
LaserShare MIO installs into the HP LaserJet Series IIISi, Series 4,
and Series 4SI and will support serial speeds up to 460K bps.
LaserShare connects directly into the optional I/O or MIO slot of the
laser printer. Power is taken directly from the laser printer so there is
no need for a power cord. LaserShare and LaserShare MIO can
accept data from all ports simultaneously. Print jobs are printed on a
first-in first-out basis. All LaserShare models come standard with a
buffer that can range from 256K to 4MB. The buffer on LaserShare
MIO models may range from 1MB to 4MB. LaserShare 4C and
LaserShare 4C MIO come with four EIA-232C serial ports.
LaserShare 8C and LaserShare 8C MIO come with eight serial ports,
LaserShare 4E comes with two parallel and two serial ports, and
LaserShare 4A and LaserShare 4A MIO come with four parallel ports.
* The LaserShare device for the Brother HL8e and HL8v is
referred to as LaserShare 4CB. This device is available with
four (4) serial computer ports and a fixed buffer size of 256KB.
The BayTech Print Server Plus PS-4A, PS-4C, and PS-4A models are
user configurable, high speed, network print servers that support up to
four peripherals including printers and modems. The PS-4A has four
parallel ports, the PS-4C will has four high speed serial ports, and the
PS-4E has two parallel and two high speed serial ports. The BayTech
LaserShare Network PS-MIO is a network print server card which
installs into the MIO slot of the HP LaserJet Series IIISi, Series 4, and
Series 4Si laser printers. Each Print Server Plus is compatible with
Novell NetWare using normal NetWare commands and utilities (i.e.,
PCONSOLE, CAPTURE, and NPRINT). You may use an Ethernet
10BASE2 (thin coax) or 10BASE-T (twisted pair) network interface.
The BayTech print server services up to 32 print queues distributed on
as many as 32 file servers.