Owner`s manual

5
USER-PROGRAMMABLE CONFIGURATIONS:
Reconfigurable in menu-driven mode through
configuration port. Saved in non-volatile memory to
become power-up default configuration.
Through Host Port or any Serial Computer Port:
Baud rate: (per port) 300, 600, 1200, 2400, 4800,
9600, 19200, 38400. Other rates optional.
Word size: (per port) 7 or 8 bits.
Parity: (per port) Even, odd or none.
Stop bits: (per port) 1 or 2.
XON/XOFF: (per port) Enabled or disabled
individually for transmit and receive.
Input Inactivity Timeout: (per port) 1 to 200 seconds,
or no timeout.
Port Logical Name: (per port) Maximum 16
characters.
Port Select Mode: (per port)
Mode A = Port selection anytime while
printing.
Mode B = Port selection at beginning of
printing;
Form feed mode: (per port) No form feed.
Form feed at beginning of printing only.
Form feed at end of printing only.
Form feed at both beginning and end of printing.
I.D. page message: Enabled or disabled.
Through Host Port Only:
Port Select Code: 1 to 8 ASCII characters.
Port designation: Computer port or printer port.
I.D. page message: Maximum 80 characters.
I.D. page message printing schedule: Beginning of
printing or end of printing.
MINIMUM SIZE PRINT JOB: 3 characters.