Owner`s manual

103
PROBLEM: PRINT JOB SWITCHES PRINTERS IN THE MIDDLE OF
A PRINT JOB
CAUSE: Timeout period too short.
SOLUTION: Increase input inactivity timeout period via
configuration mode.
CAUSE: Port Select Code sent in the middle of the
document.
SOLUTION: Verify that the Printer Select Code is not
contained in the document. Do not activate the hot
key software while the print job is still being sent
from the computer.
CAUSE: Characters used in Port Select Code are too
common and may inadvertently appear
somewhere in print job.
SOLUTION: Change Port Select Code to a unique
character sequence.
PROBLEM: PRINT JOBS INTERMIX
CAUSE: Timeout period is too short.
SOLUTION: Increase input inactivity timeout period via
configuration mode.
PROBLEM: MODEL 24 DOES NOT TIMEOUT
CAUSE: Timeout is set to zero (0).
SOLUTION: Increase input inactivity timeout period via
configuration mode.
CAUSE: Port selected is designated as computer port.
SOLUTION: Send the Port Select Code followed by a
terminating character: Enter/Return or Line Feed .