Owner`s manual

96
)

Please check this troubleshooting guide before calling BayTech
Tech Support.
NOTE: This troubleshooting guide is geared towards the IBM PC, AT,
XT family and compatibles. The term "PC" as used below refers to any
IBM PC, AT, XT or compatible.
PROBLEM: DATA DOES NOT PRINT
SYMPTOM: POWER LED DOES NOT ILLUMINATE
CAUSE: Unit is not turned on.
SOLUTION: Put switch on.
CAUSE: A/C Power cord is not plugged in.
SOLUTION: Plug power cord into proper A/C power
outlet.
CAUSE: Fuse Blown.
SOLUTION: Unplug A/C power cord and check
internal fuse. If blown, replace with same type and
rating of fuse.
SYMPTOM: ON POWER-UP, ALL LEDs COME ON AND STAY
ON
CAUSE: Model 24 failure.
SOLUTION: Call BayTech tech support.