Owner`s manual

4
 
INTERFACE: Serial ports - Asynchronous EIA-232
(CCITT V.24), -12v mark, +12v space. Full duplex
communication. Optional EIA-422 and current loop.
Parallel ports - Centronics protocol.
I/O MODULES: (Maximum 6 I/O modules per unit;
minimum 2 serial ports per unit.)
Four EIA-232 DTE ports (MOD 4C)
Two EIA-232 DTE ports/two parallel ports (MOD 4E)
Four current loop ports (MOD 4L)
Four EIA-422 ports (MOD 4Y)
Four parallel ports (MOD 4A)
STANDARD FACTORY DEFAULT POWER-UP
CONFIGURATION
Serial ports:
Baud rate: 9600.
Word size: 8 bits.
Stop bits: 1 bit.
Parity: None.
XON/XOFF: Off.
Logical Name: Device A to X.
Input Inactivity Timeout: 20 seconds.
Port Assignment: Port 2 - Printer port.
All other ports - computer ports.
Port Select Code: $SELECT.
Printer Select Mode Anytime.
Form Feed Mode: Disabled.
I.D. Page Message: Off. "This print job is for:".
I.D. Page Message Schedule: Before each print job.