Owner`s manual

86
Enter the desired ID in the
Work Station ID :
field. A remote
user must type in the name entered here in order to connect
to this workstation once a connection is made. Select
[ OK ]
after the desired workstation ID has been entered. This
action will terminate the DIAL.EXE program.
5. Workstation Advertising: A workstation on the network must
advertise to the Print Server Plus that it is available for Dial-
in operation. If a remote user dials in to a network modem
and enters a non-advertising Workstation ID, the remote
user will be sent an error message. The local workstation
will automatically advertise after the Workstation ID has
been assigned (see Step 4).
6. Once you have made the necessary configuration changes
in PSQMGR and pcANYWHERE/LAN, and the local
workstation is advertising, you are ready to perform Dial-in
operations. The MSHELL program should be loaded on the
appropriate local host workstation(s). Use the following
procedure: