Owner`s manual

This menu shows

Modem Init String:

Prompt String:

Answer String:

HangUp String:

WkStn Init String:

Access

Code:

Time Out:

, and

Nmbr of Rings:

. The values shown

here are default values. If the default values are acceptable,

you may proceed to Step 3. The following items describe

these selections in more detail.

NOTE:

The

[ Factory Setup ]

selection will reset all strings

and other fields to the factory default values which are given

in the following items. The factory default values should be

satisfactory for most applications.

2a. The

Modem Init String

is sent to the local network modem

when the modem is initialized after a call or when the Print

Server Plus is reset. The default

Modem Init String

ATS0=1&C1^M (^M =

Carriage Return

) which will put a

Hayes compatible modem into auto answer mode and

force DCD to follow the state of carrier detect. You may

program the

Modem Init String

to be any character string

up to 46 characters