Owner`s manual

8. Assign the ports on the selected print server to service print

queues as follows:

a. Highlight the desired peripheral and select

File

Servers/Queues

from the "Configure Printers" menu.

NOTE:

The desired peripheral must be installed on

the print server before you assign print queues to it.

b. Highlight the desired queue in the

Available Queues

list and select

[ Add <= ]

. Assign the print queue the

desired priority, 1 to 10 with 1 having highest priority.

Repeat this step for all desired queues on the

selected printer and exit the "File Servers & Queues"

menu.

c. Repeat steps 8a and 8b for the remaining ports on

the selected print server and then repeat all of Step 8

for any other print servers added to the network.

9. The installation is complete. You should be able to print

through the BayTech print server using normal NetWare

print commands (e.g., CAPTURE, NPRINT, or PCONSOLE).

BayTech print server will support all of PCONSOLE's Print

Server/Control functions. Please see

Section 8

for modem

sharing instructions and

Section 9

for a definition of the

LEDs on the front panel. If you experience any difficulties,

please refer to

Appendix C

(Troubleshooting).