Owner`s manual

66

QUICK PRINT SERVER INSTALLATION
USING PSQMGR
This section addresses the initial installation of your BayTech print
server using PSQMGR. You should have basic knowledge of the
concepts used in the NetWare PCONSOLE program. Although
PSQMGR is different in appearance than PCONSOLE, the
BayTech utility performs equivalent PCONSOLE functions (i.e.,
change current file server, print queue information, and print server
information). Please follow the steps below to configure your
BayTech print server as a network print server using PSQMGR.
1. Log in as a Supervisor. The print server must be cabled to
the network and powered on. Activate the BayTech
PSQMGR program by typing
PSQMGR
from the public
directory prompt where the BayTech software is located (see
Section 4.2
). Press <ENTER> to close the "Information"
menu. The "File Servers" menu will appear.
2. Log on to the appropriate file server(s). You must be logged
on to a file server to install the BayTech print server as a
print server on that file server. To log in to a file server in the
"Available Servers" list, first select the "Available Servers"
list. Next, highlight the desired file server and select
[
<=login ]
. The "Login" menu will appear. Type in your user
name followed by any applicable password. The selected
file server will appear in the "Logged Servers" list. To exit
out of the "File Servers" menu, select
[ Exit ]
.
3. a. Select "Print Server" from the main menu (
ALT-P
).
b. Select
[Insert]
from the "Available Print Servers"
menu.
c. Select
[Uninstalled Print Server]
from the "Insert Print
Server" menu (
ALT-U
).
d. Highlight the default BayTech print server name in the
"Servers" menu which is labeled on the bottom panel.