Owner`s manual



PRINT SERVERS - [ Config ]

If you select

[ Config ]

from the "Print Servers" menu, you may change

printer configuration and install a printer or assign/remove print queues

for the individual ports of the selected print server. You may also remove

a printer, view the current status of a printer, or control a printer on the

selected print server. For the PS-4C and PS-4E units, you may configure

modem communication parameters for dial-in modem communication

and/or assign a network user to have virtual access to an attached

modem for dial-out communication. The "Print Server Configuration"

menu will appear as follows:

This menu shows

Information Source:

Print Server Name:

Current File

Server:

, and

Printer List

. You may change the current file server by

clicking on the

symbol shown adjacent to the

Current File Server:

field

or by typing

ALT-C

. The list of logged file servers will appear. Highlight

the desired file server and then press <ENTER> or double click. The

name of the selected print server will appear in the

Print Server Name:

field. The

Information Source:

field shows where the information shown

in the

Printer List

originates. This source may be a logged file server or

the selected print server. You may toggle the information source by

selecting

[Information Source]