Owner`s manual



PRINT SERVERS - [ Oprs ]

The

[ Oprs ]

selection in the "Print Servers" menu allows you to

assign or remove print server operators from the selected print

server. The "Print Server Operators" menu will appear as follows:

This menu shows

Print Server Name:

Current File Server:

Present

Operators

, and

Available Operators

. You may change the current file

server by clicking on the

symbol shown adjacent to the

Current File

Server:

field or by typing

ALT-C

. The list of logged file servers will

appear. Highlight the desired file server and then press <ENTER> or

double click. The selected print server will appear in the

Print Server

Name:

field.

You may add an operator in the

Available Operators

list to the

Present

Operators

list by highlighting the desired operator and selecting

[ Add <= ]

. You may remove an operator in the

Present Operators

list by

highlighting the desired operator and selecting

[=>Remove]

NOTE:

To change BayTech print server operating and port parameters,

you must be logged in as a supervisor.