Owner`s manual

NOTE:
When adding a new BayTech print server to the network,
the name shown in the
[Uninstalled Print Server]
field will be the
default name (see
Section 4.6
). If you wish to change the print
server's default name after it has been inserted, you must use the
[
BayTech ]
selection in the "Available Print Servers" menu (see
Section 7.6.7
).

PRINT SERVERS - [ Delete ]
To delete a print server, highlight the desired print server in the
Print Servers
list and select
[ Delete ]
from the "Print Servers"
menu. The "Delete Print Server" menu will appear as follows:
Highlight the file server you wish to delete the selected print server from
in the
Installed
list on the left and select
[=>Remove]
. If you delete the
selected print server from a file server in error, highlight the file server in
the
Available
list on the right and select
[ Add <= ]
.
WARNING:
If a print server is deleted in error and added without first
exiting this menu, the print server will lose its configuration parameters.