Owner`s manual

4. Apply power to the printer. When the printer completes its
power-up self test, take the printer off-line and hold the
Test
key down until "SELF TEST" appears on the display and
then release the
Test
key. The printer should print out a
SELF TEST
page which will include information for the PS-
MIO as follows:
MIO CONFIGURATION
Bay Technical Associates Inc.
Version 1.00
LaserShare = PS-MIO
NAME =
XXX
ADDRESS =
YYY
XXX is the print server name and YYY is the print server
node address. This menu will confirm the installation of the
PS-MIO. Proceed to
Section 4.6
.