Owner`s manual


PS-MIO PHYSICAL INSTALLATION
Please see
Section 4.5.1
if you are installing the PS-MIO into an
HP LaserJet Series IIISi or
Section 4.5.2
if installing the PS-MIO
into an HP LaserJet Series 4.

HP LASERJET SERIES IIISI INSTALLATION
The PS-MIO installs inside the HP Laserjet IIISi in the place of the
existing interface or adapter card. The interface card has a
Centronics parallel port and an EIA-232/EIA-422 serial port as
shown in
Figure 3
below.
Figure 3: HP Laserjet Series IIISi
Interface Card