Owner`s manual

FACTORY-SET POWER-UP DEFAULT CONFIGURATION:

Serial Peripheral Ports (PS-4C and PS-4E only):

Baud rate:

9600 bps.

Data bits:

8 bits.

Stop bits:

Parity:

None.

Handshaking:

DTR.

Virtual circuit connection:

Printer.

Serial interface:

EIA-232.

+Modem Init String:

ATS0=1&C1^M

+Prompt String:

^M^JEnter Workstation ID (Ctrl-C

to Hangup):

+Answer String:

Disabled (blank)

+HangUp String:

~~~+++~~~ATH0^M

+WkStn Init String:

Disabled (blank)

+Access Code:

Disabled

+Timeout:

90 seconds

+Nmbr of Rings:

- Applicable for dial-in modem communication only if the

port is configured as a modem port.

Network Port:

Print server name:

BT-xxxxxx, where xxxxxx is the

last six hex characters of the node address. The

default name is labeled on the bottom of the unit.

Update operation mode:

Manual.

NOTE:

If the Update Operation Mode is changed

to automatic, the default time interval is 15 minutes.

Queue service interval:

4 seconds.