Owner`s manual

45
PROBLEM: CAN'T RECEIVE DATA FROM PERIPHERAL PORTS
CAUSE: Wrong peripheral port selected.
SOLUTION: If in Modes 3, 4, or 5, make sure the
host device sends the correct port selection
sequence and/or request for message command.
See Section 5.2 .
CAUSE: Peripheral device's cable.
SOLUTION: Verify that the Tx and Rx signals as well
the handshake signals for the peripheral device are
connected to the correct signals on the Model 24H.
See Section 4 .
CAUSE: Wrong Mode of Operation.
SOLUTION: Please review how to operate in the
various modes and verify that the Mode of
Operation you are operating in is the correct one
for your application (see Section 5.2 ).