Owner`s manual

31
If there are no other changes for this port, send "1" (Exit/Save), and the
Model 24H will respond with:
Save Changes Permanently ? (Y/N) :
NOTE: When changing the configuration of the host port, port 1, the
Model 24H will also respond with:
Change This Device to NEW Configuration
Before Answering the Request
Save Changes Permanently? (Y/N) :
This reminds you to change the host PC's or terminal's configuration to
match the new configuration of the host. If they do not match, you will
be locked out of the Model 24H and unable to access its functions.
CAUTION: If the serial configuration of the device you are configuring
from is not changed to match the new configuration of the port, you will
be locked out of the Model 24H and unable to access its functions. If
this happens, you must recycle power on the unit and start the
configuration process over.
If you answer "Y" (yes), the new configuration for that port will be stored
permanently in non-volatile memory, and the Model 24H will
subsequently power-up at that configuration. If you answer "N" (no),
the new configuration will be stored in RAM, and on the next power-up,
the Model 24H will revert to the previous configuration. The Model 24H
will then respond with the following prompt:
Enter Serial Port Number (? = Help, ENTER = Exit) :
Enter the number of any other serial port that you wish to reconfigure.
If you do not wish to reconfigure any other serial port, type <ENTER>
and the Model 24H will return the main configuration menu (see
Section 6.1 ).