Owner`s manual

27
 
By responding to the Enter Request : Message at the end of the main
configuration menu with "1" (Status), you may review the current
configuration status of the Model 24H.
NOTE: Some characters will be displayed in HEX notation in the
configuration mode which will appear with an "H" suffix.
The Model 24H will respond with:
Current Serial Port Configuration :
+------+------------------+-------+------+------+------+------+------+
| Port | Logical Name | Baud | Word | Stop |Parity| Xon / Xoff |
| | | Rate | Size | Bits | | Xmit | Recv |
+------+------------------+-------+------+------+------+------+------+
| 1 | Device A Host | 9600 | 8 | 1 | None | Off | Off |
| 2 | Device B | 9600 | 8 | 1 | None | Off | Off |
| 3 | Device C | 9600 | 8 | 1 | None | Off | Off |
| 4 | Device D | 9600 | 8 | 1 | None | Off | Off |
| 5 | Device E | 9600 | 8 | 1 | None | Off | Off |
| 6 | Device F | 9600 | 8 | 1 | None | Off | Off |
| 7 | Device G | 9600 | 8 | 1 | None | Off | Off |
| 8 | Device H | 9600 | 8 | 1 | None | Off | Off |
| 9 | Device I | 9600 | 8 | 1 | None | Off | Off |
| 10 | Device J | 9600 | 8 | 1 | None | Off | Off |
+------+------------------+-------+------+------+------+------+------+
Strike any Key to Continue, or X to Exit
Current Parallel Port Designation:
+------+------------------+-------------+
| Port | Logical Name | Destination |
+------+------------------+-------------+
| 11 | Device K | Input Port |
| 12 | Device L | Output Port |
+------+------------------+-------------+
Strike any Key to Continue, or X to Exit
Current Port Select Code is ................$SELECT
Current Terminate Character is..............0DH
Current Block Length is.....................32
Current Mode of Operation is................1
Strike any Key to Continue, or X to Exit