User manual

15. Diagnostic
This ADSL device supports some very useful diagnostic tools:
15.1. Ping
Once you have your DSL device configured, it is a good idea to make sure you can ping the network. A
ping command sends a message to the host you specify. If the host receives the message, it sends
messages in reply. To use it, you must know the IP address of the host you are trying to communicate
with and enter the IP address in the Host Address field. Click Ping To start the ping command, the ping
result will then be shown in this page.
Fields in this page:
Field
Description
Host Address
The IP address you want to ping.