User manual

Fields in this page:
Field
Description
Enable
Check to enable the selected route or route to be
added.
Destination
The network IP address of the subnet. The destination can be specified as
the IP address of a subnet or a specific host in the subnet. It can also be
specified as all zeros to indicate that this route should be used for all
destinations for which no other route is defined (this is the route that
creates the default gateway).
Subnet Mask
The network mask of the destination subnet. The default gateway uses a
mask of 0.0.0.0.
Next Hop
The IP address of the next hop through which traffic
will flow towards the
destination subnet.
Metric
Defines the number of hops between network nodes that data packets
travel. The default value is 0, which means that the subnet is directly one
hop away on the local LAN network.
Interface
The WAN interface
to which a static routing subnet is to be applied.
Function buttons in this page:
Add Route
Add a user-defined destination route.