Instructions / Assembly

This product is a specialized high pressure gas appliance having greater heat output than traditional

kitchen stoves. It can be referred to as a “cooker” or “appliance” in this manual. The appliance is

designed to work with a cooking vessel (pot) to steam or boil food. The appliance is only designed to

work with an approved hose and regulator utilizing Liquid Propane gas for fuel.

ABOUT THIS PRODUCT

GENERAL OPERATING

• Always inspect the appliance and its components before every use as described in this manual:

A. Ensure appliance is properly assembled and connected to the LP cylinder

B. When using a thermometer, verify it is accurate and working properly

C. Inspect hose and tank for evidence of abrasion, wear, cuts or leaks

D. Conﬁrm that nothing is obstructing the burner

E. Perform Gas Leak Test before lighting

• Position the appliance properly.

• Follow instructions in this manual to ﬁll vessel with correct amount of liquid.

• Follow Lighting/Re-Lighting Instructions in this manual

• The thermometer provided MUST be used.

• This appliance will be hot during and after use; always wear protective clothing when operating

the appliance. Use insulated mitts or gloves for protection from hot surfaces or splatter from cooking

liquids. Wear close-toed shoes.

• Carefully monitor all activity around cooker to avoid burns or other injuries.

• Make adjustments to the regulator valve and air shutter to control temperature. Use caution when

near cooker as splattered liquid may have created a slick surface.

• When removing food from the vessel, care should be taken to avoid burns from hot cooking liquids.

• When cooking is completed, turn off gas and follow the Care & Maintenance Instructions

• DO NOT place an empty cooking vessel on the cooker while in operation.

• DO NOT move the appliance while in use.

• Keep the fuel supply hose away from any heated surface(s).

• If any part or component of this appliance appears damaged or inaccurate,

DO NOT USE. Call Barbour International, Inc. for a replacement part.

DANGER