Instructions / Assembly

6
ASSEMBLY INSTRUCTIONS
READ ALL SAFETY WARNINGS & ASSEMBLY INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR OPERATING
YOUR COOKER. Inspect contents in the box to ensure all parts are included and undamaged.
FOR MISSING PARTS OR ASSISTANCE, PLEASE CALL 1-800-864-6194 M-F 7:30am - 4:30pm CST.
Proof of purchase will be required.
TOOLS REQUIRED:
Adjustable Wrench
PARTS INCLUDED:
Model #KDS1
Phillips Head
Screwdriver
1- Round Frame
3- Legs
3 - Long Bolts
7 - Locking Nuts
1 - Jet Tube with
Support Bar
1 - Heat Shield
4 - Short Bolts
1. Remove components from the box and packing.
Turn base frame upside down as shown.
Assemble legs while in this upside down position.
COOKER ASSEMBLY
1 - Set Screw
Hex Wrench,
provided
2. Attach Legs to Base Frame - Slide legs on frame to
match holes. Insert and wrench tighten all bolts and nuts.
3
3. Attach Heat Shield to Jet Tube and Support Bar
Place heat shield over jet tube and onto support bar.
Insert the small screw through heat sheild and support bar.
tighten using Phillips Head screwdriver.
5. Attach Hose to Jet Tube - Refer to Connecting Regulator
Hose Assembly to Cooker on page 10.
4. Attach Jet Tube and Heat Shield to Cooker Frame
Turn base frame right side up as shown.
Slide support bar up and match holes on interior
of cooker frame. Attach using 4 short bolts.
Wrench tighten.
1
2
1- M5 JET Regulator
Hose Assembly
4
TOOLS REQUIRED:
Adjustable Wrench
PARTS INCLUDED:
Models #KDS-182/#KDS-160
1- Cooker
SAME PARTS LIST AS
#KDS1
SHOWN ABOVE
1 - Stainless Stockpot 1 - Stainless Basket
Phillips Head
Screwdriver
Hex Wrench,
provided
Assembled View
Product color and shape may vary slightly from images due to product enhancement.