Manualshelf

Instructions / Assembly

ManualsBrandsBayou Classic ManualsOther Fryers60 Qt. Stainless Boil and Steam Kit
11121314151617181920
12
POSITIONING THE COOKER
1. Check wind direction.
2. Position cooker DOWNWIND
from the nearest structure; no closer than 10-ft from nearest building or railing, keeping
flames from any potential oil/grease fire away from nearest structure.
3. Position cooker DOWNWIND from the LP Gas Cylinder keeping a minimum distance of 20" apart so the heat of the cooker
does not reach cylinder.
4. Position cooker on level ground in a well ventilated location, a safe distance from combustible materials, rails, buildings,
overhangs or tree branches.
5. Check that gas supply hose does not contact surfaces
that may become hot during use.
Hose is a trip hazard. Do not walk between cooker and cylinder.
Wind Direction
Make sure overhead is clear of combustible materials!
10 ft.
Clearance
10 ft.
Clearance
LIGHTING INSTRUCTIONS
Follow these instructions exactly. Read and follow all warnings and instructions in this manual before using your cooker.
1.
Make sure regulator valve and cylinder valve are in the OFF position.
2. Look into the jet tube to be certain that orifice hole is clean and facing straight up.
3. Turn ON the fuel supply by S-L-O-W-L-Y rotating the cylinder valve counter-clockwise one full turn.
HINT: Turning the cylinder valve quickly causes a sudden rush of gas that sometimes activates the Gas Flow Limiting Device.
To prevent this, always rotate cylinder valve S-L-O-W-L-Y.
4. Place fire place match or long lighter over the jet tube, then S-L-O-W-L-Y turn regulator valve clockwise until you hear gas
HISSING to the burner. Then light the cooker, keeping hands and face away from the top of the jet tube. In direct sunlight,
flame may appear clear.
5. Adjust the regulator valve for desired flame height.
6. After lighting, rotate cylinder valve to full open.
WARNING
DO NOT stand with head, body or arms over the cooker when lighting. Loose clothing and hair can catch fire.
BEFORE LIGHTING
O
F
F
-
C
L
O
C
K
W
I
S
E
O
F
F
-
C
L
O
C
K
W
I
S
E
Make sure LP Cylinder is OFF
1
Make sure Regulator Valve is OFF
2
Make sure Jet Tube is clean,
orifice hole facing straight up
CLOCKWISE
CLOCKWISE
20 in.
Minimum
Orifice
Hole
Jet Tube