Instructions / Assembly

8
ASSEMBLY INSTRUCTIONS
READ ALL SAFETY WARNINGS & ASSEMBLY INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR
OPERATING YOUR COOKER. Inspect contents in the box to ensure all parts are included and undamaged.
FOR MISSING PARTS OR ASSISTANCE, PLEASE CALL 1-800-864-6194 M-F 8am - 5pm CST.
Proof of purchase will be required.
TOOLS REQUIRED:
Adjustable Wrench
PARTS INCLUDED:
1. Remove components from the box and packing.
2. Attach Heat Shield to Support Bar
Line up heat shield over hole in support bar. Slide long bolt through
hole and attach nut. Wrench tighten.
3. Attach Hose to Burner - Refer to Connecting Regulator Hose Assembly
to Cooker on page 11.
COOKER ASSEMBLY
1- Frame with
BG14 Burner
KAB4
KAB6
TOOLS REQUIRED:
Adjustable Wrench
PARTS INCLUDED:
1 - Long Bolt
1 - Nut
1- Regulator
Hose Assembly
#M5HPR-30
1- Heat Sheild
1- Air Shutter
1- Spring
1- Frame with
BG14 Burner
ASSEMBLED UNIT
ASSEMBLED UNIT
Turn Air Control Shutter to
adjust flame quality
Turn CLOCKWISE
Wrench Tighten
Place large end of spring
against Air Control Shutter
1. Remove components from the box and packing.
2. Attach Heat Shield to Support Bar
Line up heat shield over hole in support bar. Slide long bolt through
hole and attach nut. Wrench tighten.
3. Attach Hose to Burner - Refer to Connecting Regulator Hose Assembly
to Cooker on page 11.
COOKER ASSEMBLY
Turn Air Control Shutter to
adjust flame quality
Turn CLOCKWISE
Wrench Tighten
Place large end of spring
against Air Control Shutter
16" WIDE
22" WIDE
1- Brass Orifice
Connector
1 - Long Bolt
1 - Nut
1- Regulator
Hose Assembly
#M5HPR-30
1- Heat Sheild
1- Air Shutter
1- Spring1- Brass Orifice
Connector