Instructions / Assembly

14
The appliance will be HOT after being operated. DO NOT TOUCH the frame or
cooking vessel when re-lighting the burner.
BURNER FLAME CHECK
In sunlight or other bright light, the ame may not be visible. Always use
caution around an open ame.
CAUTION
2. Adjust the air shutter by rotating it until a mostly blue
flame is achieved.
A blue flame with little or no yellow flame indicates a proper
air/gas mixture and provides the best heat.
RE-LIGHTING
If the appliance is accidentally extinguished, turn OFF the LP cylinder valve. Wait 5 minutes to allow
gas to evacuate/dissipate, repeat Steps 1 through 4 of the Lighting Instructions.
BURNER
FLAME
BLUE
ORANGE
CORRECT
INCORRECT
1. Adjust the Regulator Valve to achieve the desired
flame height.
WARNING
Follow these instructions to adjust to the optimal burner flame.