Instructions / Assembly

ASSEMBLED
UNIT
3 - Locking
Washers
3 - Bolts 3/8” 3 - Nuts
1- 10-Qt. Fry Pot 1- Fry Basket 1- Basket Handle
ASSEMBLY INSTRUCTIONS
READ ALL SAFETY WARNINGS & ASSEMBLY INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR OPERATING
YOUR COOKER. Inspect contents in the box to ensure all parts are included and undamaged.
FOR MISSING PARTS OR ASSISTANCE, PLEASE CALL 1-800-864-6194 M-F 8am - 5pm CST.
Proof of purchase will be required.
TOOLS REQUIRED:
Adjustable Wrench
9
PARTS INCLUDED:
1- Regulator
Hose Assembly
#M5HPR
COOKER ASSEMBLY
1- 5" Fry Thermometer
˚C
˚C
˚F
2
00
15
0
10
0
5
0
100
150
250
350
700
FRY BASKET ASSEMBLY
1. Remove fry basket and handle from the box and packing.
2. Using flathead screwdriver and wrench, attach handle
to the outside of basket as shown. Wrench tighten
Assembled Basket
1- Frame
1. Remove components from the box and packing.
2. Attach Burner to Crossbar - Remove locking nut from bottom of burner. Line up burner bolt to hole
in crossbar. Insert the bolt through the crossbar and screw on locking nut. Wrench tighten.
3. Attach Hose to Burner - In one of two ways as shown below:
Refer to Connecting Regulator Hose Assembly to Cooker on page 12.
NOTE: Do not over tighten brass hose connector to burner. The air control shutter
must be able to easily turn for adjustment of flame quality. If you over tighten the brass hose connector to the burner and
the air shutter cannot turn, then unscrew the brass hose connector until the shutter can be easily turned... Very Important!
1 - BG10 Burner
with Locking Nut
1- Air Shuter
1- Spring
NOTE: BG10 Burner
may have Air Shutter
attached with screws
instead of using a
Spring.
Turn Air Control Shutter to
adjust flame quality
Turn CLOCKWISE
Wrench Tighten
OR
Turn CLOCKWISE
Wrench Tighten
Turn Air Control Shutter to
adjust flame quality
Place large end of spring
against Air Control Shutter
Screws may need tightening
DO NOT over tighten!
IMPORTANT:
Must be able to turn
Air Control Shutter...
DO NOT over tighten!
NO
SPRING
Model #SP50 Cooker
TOOLS REQUIRED:
Adjustable Wrench
PARTS INCLUDED:
Flathead Screwdriver
Model #B135 Fish Cooker
1- Cooker
SAME PARTS LIST AS
#SP50
SHOWN ABOVE
3 - Locking
Washers
3 - Bolts 3/8” 3 - Nuts
1- 8.5-Qt. Cast Iron
Dutch Oven with Lid
1- Fry Basket 1- Basket Handle
TOOLS REQUIRED:
Adjustable Wrench
PARTS INCLUDED:
Flathead Screwdriver
Model #B159 Fish Cooker
1- Cooker
SAME PARTS LIST AS
#SP50
SHOWN ABOVE