Specifications

8 CHAPTER 3: COMPONENTS / SYSTEMS
3788 Motor
y
acht
•
Owner’s Manual
Supplement
AC/DC Cabinet
110-Volt AC System
The AC system can be energized by shore power, inverter power, or the optional onboard generator. Master Circuit
breakers, located on the AC panel (see photo above), provide power source selection. This system is designed so that
ship’s power and shore power sources
cannot
supply power simultaneously.
Shore Power
Shore power receptacle(s) are located outside the cabin on the port side. Shore power receptacles are rated either 30
or 50 amps with appropriate power cords furnished. Since not every shore installation has 30 amp service, we recom-
mend that 15 and 20 amp adapters be purchased. However, whenever 15 or 20 amp adapters are used, there will be a
corresponding drop in supplied power from the dockside system.
WINDLASS
POWER
WATER LEVEL
INDICATOR
GENERATOR
INSTRUMENTS
(OPTION)
INVERTER
CONTROL
PANEL
VOLTAGE
GAUGE
DC MASTER
GENERATOR
110-VOLT AC
VOLTMETER
POLARITY
MASTER
COMPONENT
BREAKERS
CIRCUIT
(OPTION)
12-VOLT DC
CIRCUIT
BREAKER
LIGHTS
START/STOP
SWITCH
LINE
MASTER
BREAKERS
MACERATOR
SWITCHES
VOLTMETER
SELECTOR
12-VOLT
DC PANEL
12-VOLT
DC PANEL
110-VOLT
AC PANEL
BREAKERS
CAUTION
Whether usin
g
shore power, inverter power or the optional
g
enerator, the simultaneous use of
several AC components can result in an overloaded circuit. It may be necessary to turn off one
or more accessories in order to use another accessory.
!
CAUTION
WATER HEATER DAMAGE HAZARD! Do not ener
g
ize the water heater electrical circuit
until the heater is COMPLETELY filled with water. Even momentary operation in a dry tank
will dama
g
e the heatin
g
elements. Warranty replacements WILL NOT be made on elements or
tank dama
g
ed in this manner.
!
DANGER
!
FIRE/EXPLOSION/SHOCK HAZARD!
•
To minimize shock and fire hazard, DO NOT modify electrical systems or relevant drawin
g
s.
•
DO NOT alter shore power connectors and use only compatible connectors.
•
Only qualified personnel should install batteries and/or perform electrical system maintenance.