SDS

SAFETY DATA SHEET
BAYES STAINLESS STEEL POLISH
Snyder Manufacturing Corporation Page 2 of 7
Hazard Statement(s):
H304: May be fatal if swallowed and enters airways
H315: Causes skin irritation
H319: Causes serious eye irritation
H335: May cause respiratory irritation
H302: May be harmful if swallowed
H317: May cause an allergic skin reaction
EU HAZARD CLASSIFICATION OF INGREDIENTS PER DIRECTIVE 1999/45/EC:
[Xn] Harmful, [Xi] Irritant
Risk Phrases:
R22: Harmful if swallowed
R36/37/38: Irritating to eyes, respiratory system and skin
R43: May cause sensitization by skin contact
R65: Harmful: may cause lung damage if swallowed
Safety Phrases:
S24/25: Avoid contact with skin and eyes
S45: In case of accident or if you feel unwell, seek
medical attention immediately,
2.3 HEALTH HAZARDS OR RISKS FROM EXPOSURE:
SYMPTOMS OF OVEREXPOSURE BY ROUTE OF EXPOSURE: The most significant routes of exposure for this
product are by inhalation, skin contact, eye contact or ingestion.
ACUTE:
INHALATION: Inhalation of mists may be irritating to the respiratory tract.
CONTACT WITH SKIN: Repeated or prolonged contact may cause skin irritation and or possible allergic
reaction.
EYE CONTACT: Contact may irritate the eyes, resulting in redness or watering.
INGESTION: Ingestion may cause gastrointestinal irritation with nausea and diarrhea. Aspiration hazard if
swallowed and enters lungs.
CHRONIC: None known
TARGET ORGANS: Acute: Eyes, Skin, Respiratory System Chronic: None Known
3. COMPOSITION AND INFORMATION ON INGREDIENTS
Hazardous Ingredients:
WT%
CAS#
EINECS #
Hazard
Classification
Risk Phrases
Linear Parraffins
1-10%
64771-72-8
265-233-4
[Xn] Harmful
R65
Mineral Oil
30 - 75%
8042-47-5
232-455-8
[Xn] Harmful
R65
Citrus Distillate
1 5%
5989-27-5
227-813-5
[Xi] Irritant
R38, R43
Propylene Glycol Ether
1 10%
34590-94-8
252-104-2
[Xi] Irritant
R36
Dimethyl Siloxane
1 10%
63148-62-9
Not Listed in
ESIS
Not Classified
None
Balance of other ingredients is less than 1% in concentration (or 0.1% for carcinogens, reproductive
toxins, or respiratory sensitizers).
NOTE: ALL WHMIS required information is included in appropriate sections based on the ANSI Z400.1-2010 format. This product has been classified in
accordance with the hazard criteria of the CPR and the MSDS contains all the information required by the CPR, EU Directives and the Japanese
Industrial Standard JIS Z 7250: 2000.
4. FIRST-AID MEASURES
4.1 DESCRIPTION OF FIRST AID MEASURES:
EYE CONTACT: If product enters the eyes, open eyes while under gentle running water for at least 15 minutes. Seek
medical attention if irritation persists.
SKIN CONTACT: If product contacts skin, wash skin thoroughly with soap and water after handling. Seek medical
attention if irritation develops and persists.
INHALATION: If breathing becomes difficult, remove victim to fresh air. If necessary, use artificial respiration to
support vital functions. Seek medical attention.
INGESTION: If product is swallowed, call physician or poison control center for most current information. If
professional advice is not available, do not induce vomiting. Never induce vomiting or give diluents (milk or water) to
someone who is unconscious, having convulsions, or who cannot swallow. Seek medical advice. Take a copy of the
label and/or SDS with the victim to the health professional.
MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE: None known