Product Label

ACTIVE INGREDIENT
Triclopyr, triethylamine salt . . . . . . . . . . . . . . . . 0.8%**
OTHER INGREDIENTS . . . . . . . . . . . . . . . . . . . 99.2%
TOTAL 100.0%
EPA Reg. No. 92564-8
EPA Est. No. indicated by 3rd and 4th digits of the batch number on this package.
(75) = 5905-AR-01 (77) = 070989-MO-001 (39) = 58996-MO-1 (57) = 071106-GA-003
QUICK FACTS
READ THE LABEL FIRST!
KILLS
WHERE TO USE
• Special Penetrating Formula Kills Even the Toughest Plants
• Works Systemically, Killing Listed Weeds Right Down to the Root
• Brush, Vines, Brambles and Other Listed Woody Plants • Listed Broadleaf Weeds
Use around homes, cabins, buildings, fences, walkways, trails and wooded areas.
WHEN TO USE
• When weeds are leafed out. • When brush is leafed out.
For questions or comments,
call toll-free 1-877-229-3724, or visit us on-line at www.BioAdvanced.com
Indicaciones
en español
después de las
de inglés
FOR OUTDOOR
RESIDENTIAL USE ONLY
501420960a 170515V1
** 0.58% Triclopyr acid equivalent
HOW TO USE YOUR SPRAYER:
1. Remove ERGO-GRIP spray wand from pocket • Remove wrap from coiled hose. • Remove protective battery strip from sprayer handle.
DIRECTIONS FOR USE
It is a violation of Federal law to use this product in a manner inconsistent with its labeling.
STORAGE
• Slide OFF-ON switch to OFF position.
• Do not unplug hose. Leave connected to cap.
• Turn spray nozzle to the o position.
• Fold spray wand down against sprayer handle.
• Return ERGO-GRIP spray wand to pocket
for storage.
6. SQUEEZE
• Squeeze trigger
to dispense product.
Sprayer may require
several seconds to
prime before product
is released.
• Release trigger to
stop spraying.
5. TURN POWER ON
• Slide OFF-ON
switch to ON
position.
4. OPEN SPRAY
WAND
• Unfold spray wand
until it snaps into
place.
• Point spray nozzle
away from body.
• Adjust spray nozzle
to desired setting.
3. CONNECT HOSE
TO CAP
• Insert plug at end
of coiled hose into
hole on cap and
push rmly until
secure.
4 AA Batteries Included For important battery information – see booklet.
2. REMOVE STICKER
& CAP COVER
• Remove sticker
and cap cover
before inserting
hose plug.
OPEN
Resealable Label
for Directions
&
Precautions