Use and Care Manual

OPEN
Resealable Label
for Directions &
Precautions
IMPORTANT!
READ BEFORE
USE
QUICK FACTS
• Special Penetrating Formula Kills
Even the Toughest Plants
• Works Systemically, Killing Weeds to
the Root
• Brush, Vines, Brambles and Other Woody Plants
• Broadleaf Weeds
• When weeds are leafed out.
• When brush is leafed out.
Use around homes, cabins, buildings, fences,
walkways, trails and wooded areas.
For questions or comments, call toll-free
1-877-BayerAG (1-877-229-3724), or
visit us on-line at www.BayerAdvanced.com
FOR OUTDOOR RESIDENTIAL USE ONLY
READ THE LABEL FIRST!
KILLS
WHERE
TO USE
WHEN
TO USE
ACTIVE INGREDIENT:
Triclopyr, triethylamine salt
** 0.58% Triclopyr acid equivalent
...................................... 0.80%**
OTHER INGREDIENTS
................................................ 99.20%
TOTAL 100.00%
4194660e 120822AV1
EPA Reg. No. 72155-22
EPA Est. No. indicated by 3rd and 4th digits of the batch number on this package.
(75) = 5905-AR-01 (77) = 070989-MO-001 (39) = 58996-MO-1 (57) = 071106-GA-003
(continued)
BEFORE
YOU USE
Read and
follow these
directions
when using:
HOW
TO APPLY
Shake well
before use
DIRECTIONS FOR USE
It is a violation of Federal law to use this product in a manner
inconsistent with its labeling.
• This product will kill or injure all woody plants
contacted. Certain warm season grasses may
experience temporary yellowing when sprayed to
excess.
• If a desirable plant (other than grass) is accidentally
sprayed, immediately rinse with plenty of water.
• Apply when wind is calm.
• Keep people and pets o treated areas until spray
has dried.
• Do not apply to or around fruits or vegetables used
for food.
• Adjust spray nozzle to give a coarse spray.
• Hold sprayer about 12 inches from weed.
• Spray the weeds you want to kill until thoroughly wet
but not dripping.
TIPS:
• Use a sheet of cardboard or plastic to protect desirable
plants from accidental contact with the product.
• To Kill Vines,
For vines growing on desirable plants, cut the vine
and spray the stump.
Indicaciones
en español
después de las
de inglés
Attach Sprayer
Remove sprayer from bottle
and extend hose.
Open ip-cap on bottle.
Insert hose and plug into ip-cap
opening until it snaps into place.
Spray
Adjust nozzle to stream or
spray position.
Point sprayer downward and
squeeze trigger repeatedly
until liquid is released.
After Use
Turn sprayer nozzle to X (o)
position. Do not unplug hose.
Return sprayer to bottle.
Sprayer will snap into place.