MSDS

Bayer Environmental Science
Material Safety Data Sheet
MSDS Number: 102000011813
BAYER ADVANCED CARPENTER ANT & TERMITE
KILLER PLUS READY-TO-USE
MSDS Version 2.0
Page 3 of 7
SECTION 6. ACCIDENTAL RELEASE MEASURES
Personal Precautions
Isolate hazard area. Keep unauthorized people away. Avoid contact with spilled
product or contaminated surfaces.
Methods for Cleaning Up
Take up with absorbent material (e.g. sand, diatomaceous earth or a proprietary
absorbent material). Collect and transfer the product into a properly labelled and
tightly closed container. Clean contaminated floors and objects thoroughly,
observing environmental regulations.
Additional Advice
Use personal protective equipment.
SECTION 7. HANDLING AND STORAGE
Handling Procedures
Handle and open container in a manner as to prevent spillage. Freezing will
affect the physical condition but will not damage the material. Thaw and mix
before using.
Storing Procedures
Keep tightly closed in a dry and cool place. Store in original container and out of
the reach of children, preferably in a locked storage area.
Do not freeze.
SECTION 8. EXPOSURE CONTROLS / PERSONAL PROTECTION
General Protection
There are no known hazards associated with this product when used according
to the label directions. The following guidelines should be followed.
Avoid inhalation of vapour or mist. Avoid contact with skin and eyes.
Wash hands thoroughly with soap and water after handling and before eating,
drinking, chewing gum, using tobacco, using the toilet or applying cosmetics.
Do not allow children or pets to enter the treated area until it has dried.
Engineering Controls
Use only in well-ventilated areas.
SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance
opaque
Physical State
liquid slightly viscous